Cold RolledSteel is the common term for steel products shaped by cold-working processes carried out near room temperature, such as rolling, pressing, stamping, bending, etc. Stock bars and sheets of cold-rolled steel are commonly used in all areas of manufacturing. The terms are opposed to hot-formed steel and hot-rolled steel.
|
COLD ROLLED STEEL |
|
|
JIS G3141-2005 |
EN10130-2006 |
ASTM A1008-12A |
|
COMMERCIAL QUALITY |
SPCC |
DC01 |
CS Type A/B/C |
|
DRAWING QUALITY |
SPCD |
DC03 |
DX Type A/B |
|
DEEP DRAWING QUALITY |
SPCE
SECF{non aging} |
DC04 |
DDS |
|
EXTRA DEEP DRAWING |
SPCG{non aging} |
DC05/DC06 |
EDDS |
|
THICKNESS |
0.1MM--4.00MM |
|
WIDTH |
30MM-2000MM |
|
SHEETS LENGTH |
0-6000MM |
|
COIL INNER DIAMETER |
508MM OR 610MM |
|
SURFACE TREATMENT |
MATT FINISH/BRIGHT FINISH, OILED/DRY |
|
ANNEALING METHODS |
BRIGHT ANNEAL/BLACK ANNEAL |
|
COIL WEIGHT |
1MT-25MT |
APPLICATION：
Thisproduct has a wide range of USES, such as automotive manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food and so on
